Tipi di dischi freno - Notizie - Ningbo Kunpeng Auto Electric Co., Ltd.

Parliamo prima dei dischi freno.Dischi frenosi dividono generalmente in dischi ventilati medi, dischi ventilati forati e dischi freno in ceramica. Come suggerisce il nome, il disco di ventilazione centrale è cavo all'interno e l'aria fredda può passare attraverso il centro per raffreddarsi. Viene generalmente utilizzato per la ruota anterioredischi freno of civil vehicles. Perforated ventilating plate Perforated ventilating plate is to perforate the surface of the ventilating plate to ensure air circulation to the greatest extent and reduce heat attenuation. The perforated ventilating plate is one level higher than the ventilating plate. Ceramic dischi freno are not ordinary ceramics, but reinforced composite ceramics composed of carbon fiber and silicon carbide at a high temperature of 1700 degrees. The weight of the ceramic disc is less than half of the ordinary cast iron disc. For example, the SLR MCIAREB with ceramic brakes has a front wheel brake disc with a diameter of 370mm but a weight of only 6.4 kg. The CL-CLASS, which uses ordinary dischi freno, has a front disc diameter of 360mm but weighs up to 15.4 kg. Although the ceramic brake disc has excellent braking performance, its price is very expensive. For example, the optional price on high-performance sports cars of Porsche and Audi is more than 100,000 yuan.

Parliamo dipastiglie dei freni again. Generally divided into asbestos type pastiglie dei freni, semi-metal type pastiglie dei freni, low metal type pastiglie dei freni, ceramic type pastiglie dei freni, NAO (non-asbestos organic matter) type pastiglie dei freni. The so-called asbestos-type pastiglie dei freni are the earliest pastiglie dei freni used at low cost and easy to manufacture. Early and common use. However, asbestos materials have been confirmed by the medical community to be carcinogens and their use is now banned. From the appearance of semi-metal pastiglie dei freni, it has fine fibers and particles, which can be easily distinguished from asbestos type and NAO type. Compared with traditional brake materials, it mainly uses metal materials to increase the strength of the pastiglie dei freni.At the same time, temperature control and heat dissipation capabilities are also superior to traditional materials. However, because the material of the brake pad contains more metal components, especially in a low temperature environment, excessive braking pressure will cause the surface between the brake disc and the brake drum to wear and produce noise. From the appearance of low-metal pastiglie dei freni, low-metal pastiglie dei freni are somewhat similar to semi-metal pastiglie dei freni, with fine fibers and particles. The difference is that they have lower metal content than semi-metal pastiglie dei freni. Ceramic pastiglie dei freni The pastiglie dei freni of this formula use new ceramic materials with low density, high temperature resistance and wear resistance. It has the advantages of no noise, no dust, no corrosion to the hub, long service life, and environmental protection, but the price is higher. As for the NAO (non-asbestos organic matter) pastiglie dei freni, it should belong to the legendary artifact. It has the advantages of no dust pollution, low wear, low noise, and the service life is significantly extended.